MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump

MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump
MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump

MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump

Memmert VO200 Vacuum Heating and Drying Oven. With PM200 Self Drying Vacuum Pump. Includes two thermoshelves (one supplied as standard with the oven and one extra). The oven can be viewed by appointment.

1x Renfert VO200 Vacuum oven (UK mains plug) 2x Aluminium thermoshelf. 1x Stainless steel waste/drip tray. 1x KNF LABOPORT PM16633-842.3 Self drying diaphragm vacuum pump Supplied by Memmert under catalogue number PM200. Essentially a standard KNF LABOPORT N 842.3 pump with addition of a solenoid valve which connects to the vacuum oven. 1x Generic European to UK mains plug adapter for vacuum pump 1x Vacuum pump solenoid connection cable.

1x Vacuum hose with fittings. 1x MEMory Card XL personal profile storage card. 1x Instruction manual for oven.

1x General safety notes sheet. Instruction manual for vacuum pump is available on the Memmert website, link to the PDF can be provided upon request. Temperature setting accuracy: up to 99.9 °C: 0.1 / from 100 °C: 0.5. Temperature setting range: +20 to +200 °C. Temperature sensor: temperature measured through 4-wire Pt100 sensor individually for each thermoshelf. 5°C above ambient up to +200°C. Vacuum: Vacuum range: 5 to 1100 mbar. Pressure control: Digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum, air and inert gas are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air. Permitted final vacuum: 0.01 mbar. Maximum leakage rate: 0.01 bar/h. Pump control: speed control, optimised rinsing procedures for the pump membranes as well as signal output for pump ON/OFF. Connection: Vacuum connection with small flange DN16, and gas inlet with fresh air supply. Adjustable parameters: temperature (Celsius or Fahrenheit), pressure (vacuum), programme time, time zones, summertime/wintertime.

Language setting: German, English, Spanish, French, Polish, Czech, Hungarian, Italian. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays. Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days. Function Setpoint WAIT: the process time does not start until the set temperature is reached.

Heating concept: VO direct heating: fuzzy-supported MLC (Multi-Level-Controlling) microprocessor controller adapting its performance to the volume (local temperature sensing) for each thermoshelf. Thermoshelves: 1 connection for thermoshelves in the rear. Safety: Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. AutoSAFETY: additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature.

Autodiagnostic system: integral fault diagnostics for temperature control. Stainless steel interior: Material: hermetically welded stainless steel interior of extremely corrosion-resistant stainless steel, material 1.4404. Interior: additional interior mountings of stainless steel, material 1.4404 (removable for cleaning), consisting of mounting at the sides with guide bars for thermoshelves and on top (diffusor) to avoid turbulences when aerating. Dimensions: W x H x D: 385 x 305 x 250 mm. Loading of chamber: 40 kg.

Textured stainless steel casing: Dimensions: W x H x D: 550 x 607 x 400 mm (d +38mm door handle). Door: full-sight glass door, inside spring-loaded, 15 mm thick glazed panel in safety glass, outside with anti-splitter screen. Electrical data: Voltage: Electrical load (maximally equipped) at 230 V, 50/60 Hz. Ambient conditions: Ambient temperature: +5 °C to +40 °C.

Set up: The distance between the wall and the rear of the chamber must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from the wall must not be less than 8 cm.

The item "MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump" is in sale since Wednesday, May 5, 2021. This item is in the category "Business, Office & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Lab Furnaces & Ovens".

The seller is "masterofducks" and is located in Tidworth. This item can be shipped worldwide.


MEMMERT VO200 Vacuum Heating Drying Oven w. PM200 842.3 LABOPORT Vacuum Pump


Homepage   Links   Contact Form   Privacy Policy   Service Agreement