E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition

E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition
E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition
E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition
E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition
E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition
E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition
E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition
E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition

E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition

E2M28 115/200-230 V, 1-ph, 50/60 Hz with IEC60320 connector fitted. Please contact customer care for pricing.

The EM range of oilsealed rotary pumps renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a singlephase or threephase (four pole) motor.

Each EM pump is supplied with 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps FomblinĀ® to be ordered separately. The motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device.

When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops.

The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open. You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass.

An oil filler-plug is fitted to the top of the oil box. The pump has two oil drain-plugs to allow either gravity oil drain or pressure oil drain. Beam lines and high energy physics.

Degassing/curing - oil, epoxy resin. Lasers, gas recovery and re-circulation. Load locks and transfer chambers.

The item "E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition" is in sale since Wednesday, December 14, 2016. This item is in the category "Business & Industrial\Healthcare, Lab & Life Science\Lab Equipment\Pumps".

The seller is "sc_cyclo" and is located in Lansing, Michigan. This item can be shipped to United States.


E2M28 115/200-230 V, 1-ph, 50/60 Hz IEC60320 Vacuum Pump Great Condition


Homepage   Links   Contact Form   Privacy Policy   Service Agreement