Big Vacuum Pump 4L for OCA Lamination Machine LCD screen refurbishment

Big Vacuum Pump 4L for OCA Lamination Machine LCD screen refurbishment
Big Vacuum Pump 4L for OCA Lamination Machine LCD screen refurbishment
Big Vacuum Pump 4L for OCA Lamination Machine LCD screen refurbishment
Big Vacuum Pump 4L for OCA Lamination Machine LCD screen refurbishment

Big Vacuum Pump 4L for OCA Lamination Machine LCD screen refurbishment
This big vacuum pump is used as a vacuum supply for OCA lamination machines. Specifically, use for curved OLED screens and flat LCD screen refurbishment. Gross Weight: 18.1 kg.

The 110V version includes a built-in voltage converter to support 220V. EPE foam, plastic film and wooden box. Check the oil before operating; always keep the oil over the scale mark.

Keep the tube higher than the pump entrance when installing tubes; avoid putting oil in the tube and vacuum system. Install a valve on the pump entrance; turn off the valve before turning off the pump.

Turn on the valve before turning on the pump; after turning it on, start operating when oil amount adjusted to the best. Vacuum power may be small if oil amount is too low; function effect may exist if oil amount is too high, which may also lead to electrode overloading.

Note: check the oil amount regularly; it can't be lower than the scale mark; stop operating if room temperature is too high.


Big Vacuum Pump 4L for OCA Lamination Machine LCD screen refurbishment


Homepage   Links   Contact Form   Privacy Policy   Service Agreement