Fluke 700PTP-1 Pneumatic Test/Vacuum Pump, 600 psi, 40 bar

Fluke 700PTP-1 Pneumatic Test/Vacuum Pump, 600 psi, 40 bar

Fluke 700PTP-1 Pneumatic Test/Vacuum Pump, 600 psi, 40 bar

Designed to generate either vacuum or pressure to. Pressure: 600 psi, 40 bar. Vacuum: -13 psi, -0.9 bar. Two pressure ports: 1/4 in NPT female parallel thread fitting for reference gauge or pressure module; 1/4 in.

NPT female parallel thread fitting for unit under test. Features integral pressure adjustment vernier which varies pressurized volume by 2.0 cc, over approximately eleven knob turns. Pressure variation achievable with vernier depends on the nominal pressure and total pressurized volume.

With minimum volume and maximum pressure, vernier provides 600 +/- 20 psi. With minimum volume and no pressure, vernier can also provide 0 to 70 inH2O.

Larger volumes provide smaller range of adjustment, but greater resolution. Length of stroke can be adjusted to limit maximum output pressure. Maximum output pressure adjustable from 2.5 psi to 600 psi.

For use with 700, 750P, 710 and 720 Series. The Fluke 700PTP-1 pneumatic test pump is capable of supplying pressures up to 600 psi/40 bar. The Fluke 700PTP-1 is designed for use with the Fluke 700 series pressure modules or test gauges and can also be used with Fluke 717 pressure calibrators.

The item "Fluke 700PTP-1 Pneumatic Test/Vacuum Pump, 600 psi, 40 bar" is in sale since Tuesday, May 18, 2021. This item is in the category "Industrial\Test, Measurement & Inspection\Testers & Calibrators\Calibrators\Pressure Calibrators". The seller is "allservi_4" and is located in South Yarra, VIC. This item can be shipped worldwide.


Fluke 700PTP-1 Pneumatic Test/Vacuum Pump, 600 psi, 40 bar


Homepage   Links   Contact Form   Privacy Policy   Service Agreement