Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch

Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch
Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch
Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch
Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch
Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch
Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch

Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch
Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch. Please send the following info. This system is in mostly-Good cosmetic condition with minor blemishes from use. The worst is that the vacuum meter has a big scratch/tear around the 80 millitorr spot, but the meter still works fine.

There are several scuffs/scratches/spots on the painted area and minor, normal deposits inside the chamber. The target has a hand-etched "Au" on the back and no other markings; it looks like gold but the target is pretty lightweight - it can't be very thick gold, and we do not know the purity.

This system is in Good working condition. We were able to get visible plasma generation and observe metal deposition in both manual and automatic modes. In automatic, the plasma power shuts off as the timer counts down to zero. We observed current readings just over 30mA at high pressures, which fell as the chamber pressure pumped down (as expected). The chamber pumps down reasonably quickly and eventually reaches an indicated 20 millitorr.

We did not test the pulse mode or use an external gas supply during our testing. About 2mA plasma discharge current at about 20 millitorr. Sometimes, rarely, the current meter would jump and the plasma would blink out for a moment, about as long as the blink of an eye; we are not sure why. No other testing was done.

No manuals, cords/cables, or additional items are included if not listed or shown. (1) Anatech Hummer 6.2 Sputtering System. WITH integrated Edwards dual-stage vacuum pump. Plate DC - to plate a specimen with a metal. Etch DC - to remove material from a specimen.

Plasma Exc - to clean a specimen or for crosslinking of organic specimens. Manual or Automatic (digital timer) operation. Stage diameter (the perforated, inner circle): about 6.5cm. Stage has 12 holes for mounting up to 12 SEM stubs. For questions regarding this item, please reference the SKU to help us better serve you. DougDeals directly accepts US and Canadian issued credit cards only. This item is guaranteed to be as described.

DougDeals reserves the right to refuse service to anyone that does not comply with the terms listed and linked here. The sole and exclusive venue for any lawsuit arising out of or relating to this agreement shall be the Travis County Civil Courts of Travis County, Texas. The item "Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch" is in sale since Friday, June 29, 2018.

This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Other Medical & Lab Equipment". The seller is "athomemarket" and is located in Leander, Texas. This item can be shipped worldwide.


Anatech Hummer 6.2 Sputtering System +Edwards Vacuum Pump Plasma Gold Plate/Etch


Homepage   Links   Contact Form   Privacy Policy   Service Agreement